Liveo C6-530 Liquid silicone Rubber belongs to DuPont Liveo two-part platinum addition cure medical Liquid silicone Rubber series, recognized as soft silicone Liquid Silicone Rubber with ultra-flexible Shore A 30 hardness. This Liveo C6-530 Liquid Silicone Rubber delivers fast cure processing with only 5 mins curing at 150°C, ideal for high-volume liquid injection molding production. The medical Liquid Silicone Rubber is completely free of peroxides, phthalates, latex and harmful additives, fully complying with USP Class VI, ISO 10993 and European Pharmacopoeia biocompatibility standards. Liveo C6-530 Liquid Silicone Rubber features solventless, non-blooming formula, heat resistant up to 205°C and withstands standard 120°C autoclave sterilization. No mandatory post-cure is required for most finished medical parts made from this soft silicone Liquid Silicone Rubber, supporting fabrication of delicate, flexible implant components with human tissue contact limited to maximum 29 days.

• Product: Liveo C6-530 Liquid Silicone Rubber

• Form: Two-part A & B, 1:1 equal weight mixing ratio

• Cure System: Platinum addition cure Liquid Silicone Rubber

• Hardness: Shore A 30 soft silicone Liquid Silicone Rubber

• Max service temperature: 205°C

• Molding shrinkage: 2.0%

• Tensile Strength: 8.2 MPa

• Elongation at break: >300%

• Tear strength: 28.0 kN/m

• Standard cure condition: 5 mins @ 150°C

• Shelf life: 540 days for unopened original packaging

• Density: 1130 kg/m³

• Implant limit: ≤29 days short-term human implantation

• 
  

• Liveo C6-530 Liquid Silicone Rubber soft silicone Liquid Silicone Rubber with ultra-low Shore A 30 flexible texture

• Two-part platinum catalyzed medical Liquid Silicone Rubber with rapid 5-minute fast cure cycle

• USP Class VI biocompatible material, ISO 10993 tested for cytotoxicity, sensitization & skin irritation

• Solvent-free formula, zero peroxides, phthalates, PCBs, chlorophenyls and latex additives

• Non-blooming surface, no oily migration on precision molded thin medical parts

• Excellent fluidity for filling intricate small medical mold cavities

• Stable performance after repeated 120°C 30min steam autoclave sterilization

• Heat stable up to 205°C, optional post-cure for ultra-low volatile requirements

• 540 days long shelf life, consistent batch-to-batch quality from FDA registered ISO9001 healthcare factory

• Optimized for airless metering mixing and automated injection molding lines

• Ultra-flexible delicate implant components molded from Liveo C6-530 Liquid Silicone Rubber medical Liquid Silicone Rubber

• Thin-walled catheters, soft wound contact pads and wearable medical seals made of soft silicone Liquid Silicone Rubber

• Pharmaceutical stoppers, micro fluidic gaskets and miniature diagnostic device parts

• Single-use biopharma fluid transfer soft tubing and disposable surgical accessories

• Short-term implant flexible drainage sleeves and respiratory soft silicone components