Liveo C6-560 Liquid silicone Rubber is two-part platinum addition cure medical Liquid silicone Rubber with shore A 58 firm hardness, standing out as high tear Liquid silicone Rubber with 51.0 kN/m tear strength for heavy-duty medical sealing. This Liveo C6-560 Liquid Silicone Rubber adopts solventless non-blooming formula free of peroxides, phthalates and latex, fully compliant with USP Class VI, ISO 10993 and EP silicone standards. It only takes 5 minutes to cure at 150°C, supporting high-speed liquid injection molding. The medical Liquid Silicone Rubber withstands 120°C autoclave cycles and maintains stable performance up to 205°C. No mandatory post-cure is needed for most mass production. As reliable high tear Liquid Silicone Rubber, Liveo C6-560 Liquid Silicone Rubber is widely used for durable temporary implant devices limited to maximum 29 days human tissue contact.

• Product: Liveo C6-560 Liquid Silicone Rubber

• Form: Two-part A & B, 1:1 equal weight mixing

• Cure System: Platinum catalyzed liquid silicone rubber

• Hardness: Shore A 58 firm silicone

• Max service temperature: 205°C

• Molding shrinkage: 2.7%

• Tensile Strength: 8.8 MPa

• Elongation at break: >300%

• Tear strength: 51.0 kN/m

• Modulus at 200% strain: 4 MPa

• Density: 1100 kg/m³

• Cure condition: 5 mins @ 150°C

• Shelf life: 540 days unopened ambient storage

• Implant limit: ≤29 days

• Liveo C6-560 Liquid Silicone Rubber high tear Liquid Silicone Rubber with outstanding 51.0 kN/m tear resistance

• Shore A 58 firm medical Liquid Silicone Rubber with two-part platinum fast 5-minute cure cycle

• USP Class VI biocompatible, ISO 10993 tested for cytotoxicity & skin irritation

• Solvent-free, no peroxides, phthalates, PCBs, chlorophenyl or latex additives

• Non-blooming surface without oil bleeding on precision molded medical parts

• Good fluidity for complex thin-wall medical mold cavities

• Stable mechanical property after repeated 120°C steam autoclave sterilization

• Heat resistant up to 205°C, optional post-cure for low volatile requirements

• 540 days long shelf life, consistent batches from FDA ISO9001 factory

• High-stress implant components molded from Liveo C6-560 Liquid Silicone Rubber high tear Liquid Silicone Rubber

• Durable medical gaskets, thick-walled catheters and repeated compression seals

• Medium-firm pharmaceutical stoppers and biopharma fluid transfer tubing

• Wearable medical sensor frames and reusable surgical silicone hardware

• Short-term drainage and respiratory silicone parts requiring strong tear resistance