Liveo C6-350LH is a two-part platinum addition cure medical HCR with standout low hysteresis silicone performance, different from standard Liveo HCR grades. This Liveo C6-350LH delivers excellent rebound resilience and slows crack propagation, extending service life for dynamic medical components under repeated mechanical movement. The medical HCR is free of peroxides, phthalates, latex and harmful additives, fully passing USP Class VI, ISO 10993 and EP biocompatibility tests. Liveo C6-350LH features non-blooming non-tacky surface and pigmentable formula, heat resistant up to 204°C and compatible with 120°C autoclave sterilization. No mandatory post-cure is needed for most production runs of this low hysteresis silicone, ideal for extrusion and compression molding of repeatedly flexed medical devices with short-term implantation up to 2

• Product: Liveo C6-350LH

• Form: Two-part A & B, mix 1:1 equal weight by two-roll mill

• Cure System: Platinum addition cure

• Max service temperature: 204°C

• Standard cure: 10 mins @116°C for 1.9mm cross-section

• Shelf life: 360 days for unopened original packaging under ambient temperature

• Implant limit: ≤29 days short-term human tissue contact

• Certifications: USP Class VI, ISO 10993, EP silicone compliance

• Packaging: 13.6kg & 408kg complete PE sealed kits

• Core advantage: Low hysteresis loss, high resiliency, slow crack growth

• Liveo C6-350LH two-part platinum crosslink medical HCR with low hysteresis silicone formula

• Ultra-high resiliency & inhibited crack propagation for long-life dynamic medical parts

• USP Class VI certified biocompatible material, ISO 10993 cytotoxicity & irritation validated

• Zero peroxides, phthalates, PCBs, chlorophenyls and latex additives

• Non-tacky & non-blooming surface, customizable pigmentable color matching

• Stable mechanical performance after repeated 120°C 30min autoclave steam cycles

• Heat stable up to 204°C, optional post-cure for stabilizing finished component properties

• 360 days long shelf life for unopened sealed kits

• Consistent lot-to-lot quality manufactured at FDA registered ISO9001 healthcare factory

• Dynamic flexing implant components made from Liveo C6-350LH medical HCR

• Repeatedly compressed medical seals, diaphragms and wearable sensor gaskets using low hysteresis silicone

• Short-term implant tubing, drainage devices and moving catheter accessories

• Extruded resilient silicone profiles for biopharma fluid transfer equipment

• Reusable surgical moving hardware and diagnostic dynamic sealing parts