Liveo C6-235 is unique one-part uncatalyzed HCR in DuPont Liveo Class VI series, a versatile custom curable silicone raw material without pre-mixed catalyst. Different from two-part ready-to-use grades, users can freely match platinum or peroxide curing agents on Liveo C6-235 to satisfy different molding and extrusion processes. This Liveo C6-235 uncatalyzed HCR meets USP Class VI, ISO 10993 and EP standards, free of phthalates and organic plasticizers. It supports cross-blending to adjust hardness, pigmentable for color customization, heat stable up to 204°C and tolerates 120°C autoclave sterilization. Manufacturers skilled in silicone compounding widely adopt this custom curable silicone to produce short-term implant medical parts, tubing and sealing components.

• Product: Liveo C6-235

• Form: One-part uncatalyzed silicone base (no built-in catalyst)

• Curing mode: Custom curable, compatible with platinum / multiple peroxides

• Hardness range: Adjustable 35–65 Shore A via blending

• Max service temperature: 204°C

• Implant limit: ≤29 days short-term human implantation

• Certifications: USP Class VI, ISO 10993, EP silicone compliant

• Processing: Compression molding, transfer molding, extrusion, wire coating

• Liveo C6-235 one-part uncatalyzed HCR with flexible curative selection

• Custom curable silicone compatible with platinum & multiple peroxide curing systems

• USP Class VI biocompatible, ISO 10993 tested for cytotoxicity & skin irritation

• Zero phthalates and organic plasticizer additives, non-tacky surface

• Blendable with other C6-series stocks to achieve intermediate hardness

• Pigmentable for custom color matching on two-roll mill

• High gas permeability, stable after 120°C 30min autoclave sterilization

• Peroxide-cured versions require post-cure to eliminate residual decomposition by-products

• Stable batch consistency from FDA registered ISO9001 healthcare production plant

• Short-term implant tubing, drainage devices (≤29 days human contact)

• Medical stoppers, gaskets, catheter sleeves and sealing parts

• Extruded silicone sheets, profiles for biopharma fluid transfer

• Diagnostic sensor housings and wearable medical device components

• Reusable surgical equipment, pharmaceutical packaging closures