Liveo C6-180 is the high shore A silicone grade of DuPont Liveo medical HCR series, two-part platinum addition cure elastomer with Shore A 77 hardness. This Liveo C6-180 material fully complies with USP Class VI, ISO 10993 and European Pharmacopoeia requirements, free of peroxides, phthalates, latex and toxic additives. As rigid medical HCR, it delivers stable mechanical performance including 7.2 MPa tensile strength and 614% elongation, heat resistant up to 205°C and withstands 120°C autoclave sterilization. Liveo C6-180 features non-blooming non-tacky surface and pigmentable formula, ideal for manufacturing firm medical sealing components and short-term implant devices without mandatory post-curing.

• Product: Liveo C6-180

• Form: Two-part A & B, mix 1:1 by weight

• Cure System: Platinum addition cure

• Hardness: Shore A 77 (high shore A silicone)

• Max service temperature: 205°C

• Molding shrinkage: 1.8%

• Tensile Strength: 7.2 MPa

• Elongation at break: 614%

• Tear strength: 39.1 kN/m

• Curing condition: 10 mins @115°C for 1.9mm cross-section

• Liveo C6-180 high shore A silicone two-part platinum crosslink medical HCR

• USP Class VI certified biocompatible material, ISO 10993 cytotoxicity & irritation tested

• Zero peroxides, plasticizers, latex, PCBs and chlorophenyl contaminants

• Non-tacky, non-blooming surface, customizable pigmentable color

• Stable mechanical rigidity for firm medical sealing parts

• Tolerates repeated 120°C 30min autoclave steam sterilization

• Heat resistance up to 205°C, optional post-cure for property stabilization

• 540 days long shelf life for original unopened packaging

• Consistent lot-to-lot quality from FDA registered ISO9001 healthcare factory

• Rigid short-term implant components made from Liveo C6-180 medical HCR

• Hard pharmaceutical stoppers, high-stress sealing gaskets and septa

• Extruded rigid silicone profiles and thick-walled medical tubing

• Diagnostic device housings, durable wearable medical sensor frames

• Reusable hard surgical hardware and biopharma fluid transfer closures