Liveo C6-165 is a two-part platinum addition cure medical HCR from DuPont Liveo series. This implant silicone meets strict USP Class VI and ISO 10993 biocompatibility requirements, free of peroxides, phthalates and latex additives.

Liveo C6-165 features non-blooming, non-tacky surface and pigmentable formula, heat resistant up to 204°C and supports autoclave sterilization. Manufacturers widely adopt this medical HCR for fabricating short-term implant devices, silicone tubing and medical sealing components. No mandatory post-cure is needed for most applications of Liveo C6-165 implant silicone.

• Product: Liveo C6-165

• Form: Two-part A & B, mix 1:1 by weight

• Cure Type: Platinum addition cure

• Max service temperature: 204°C

• Standard cure: 10 mins at 116°C for 1.9mm section

• Implant range: Short-term human implantation ≤29 days

• Certifications: USP Class VI, ISO 10993, EP compliant

• Packaging: 13.6kg & 408kg full kits

• Storage: Original unopened packages stored at ambient temperature

• Liveo C6-165 two-part platinum crosslink medical HCR

• Implant silicone certified with USP Class VI & ISO 10993 biocompatibility

• No peroxides, plasticizers, latex, PCBs or chlorophenyl substances

• Non-tacky, non-blooming surface, customizable pigmentable color

• Tolerates repeated 120°C 30min autoclave steam sterilization

• High gas permeability compared with thermoplastics & ordinary rubbers

• Optional post-cure to stabilize mechanical performance of finished parts

• Stable lot-to-lot quality from FDA registered ISO9001 production site

• Short-term implant silicone tubes, drainage devices made of Liveo C6-165 medical HCR

• Pharmaceutical closures, gaskets and EP standard silicone tubing

• Extruded silicone profiles, sheets and catheter sleeves

• Diagnostic equipment seals, wearable medical sensor housings

• Reusable surgical & lab medical hardware