MOLYKOTE® Longterm 2 Plus is a high-performance EP grease designed for long-term lubrication of heavily loaded metal components. It provides excellent wear protection, strong adhesion, and corrosion resistance, making it ideal for bearings, splines, and clutches in vehicles, construction machinery, and industrial equipment. Its solid lubricants and extreme pressure additives ensure reliable performance under vibration, moisture, and mixed friction conditions.

• High Load Support – MOLYKOTE® Longterm 2 Plus carries very high mechanical loads due to its extreme-pressure additive package and solid lubricant content. Bench tests under high Hertzian contact stress show that the grease maintains a stable lubricating film without structural collapse. This allows components such as bearings and gears to run under shock and peak loads while keeping scuffing and pitting under tight control.

  
  

• Long Term Stability – The grease provides durable lubrication over long relubrication intervals through a controlled oxidation profile of the base oil and thickener. Within its service temperature range from about minus twenty-five to plus one hundred ten degrees Celsius it resists hardening, bleeding and oil separation. This stability helps planners extend maintenance intervals and reduce unplanned downtime in continuous-duty systems.

  
  

• Wear Reduction – Solid lubricants in the formulation form a low friction boundary layer on metal surfaces and significantly lower wear rates in standard wear-scar and four-ball tests. The reduced metal loss slows dimensional change on races, rollers and spline teeth. As a result, equipment maintains accuracy for longer periods and the risk of seizure during start-up or slow oscillating motion is lowered.

  
  

• Strong Adhesion – MOLYKOTE® Longterm 2 Plus shows strong adhesion to metal surfaces, supported by its grease structure and selected base oil viscosity. Under vibration and centrifugal forces the lubricant film remains anchored to the contact area instead of being thrown off. This firm adhesion ensures that even at higher speeds or under reversing movement, the lubrication zone remains covered and protected.

  
  

• Corrosion Protection – Corrosion inhibitor additives protect ferrous metals from moisture, salt and industrial contaminants. In humidity and salt-spray exposure tests, treated parts show minimal rust formation compared with unprotected controls. This barrier effect safeguards components in outdoor or wash-down environments and maintains serviceability even when equipment is exposed to water and dirt.

• Automotive – Used for wheel bearings, chassis points and driveline components in commercial and special-purpose vehicles where high load and shock conditions are common. The wide service temperature range allows reliable lubrication from cold starts to fully warmed operation, helping fleets maintain consistent performance with fewer re-greasing cycles.

  
  

• Agriculture – Applied on bearings, joints and couplings in tractors, harvesters and other field machinery that work under dusty, wet and high-load conditions. The excellent adhesion and corrosion resistance protect moving parts during periods of storage and during intermittent use across seasons, improving uptime during critical harvesting windows.

  
  

• Construction – Selected for slewing rings, boom bearings and heavy pivot points on cranes, excavators and earthmoving equipment. The grease withstands slow to medium-fast movements under very high loads, so components retain smooth motion even under misalignment and shock loads common on construction sites, supporting safe and controlled operation.

  
  

• Material Handling – Used in conveyors, hoists, transfer cars and handling systems that run many hours per day with repeated start-stop cycles. Its long term stability allows extended lubrication intervals, while wear reduction properties help keep rollers and bearings running true, supporting accurate positioning and reduced maintenance interruptions.

  
  

• Transportation – Applied in rail vehicles, cargo handling systems and loading equipment where impact loads and vibration are frequent. The strong adhesion keeps the grease in place despite movement and weather exposure, helping to protect critical joints and bearings and reducing the risk of failures in service.

  
  

• Industrial Machinery – MOLYKOTE® Longterm 2 Plus is suitable for general industrial gearboxes, electric motor bearings, presses and processing lines operating under combined load, vibration and moisture. The combination of high load capacity, corrosion protection and low wear supports long service life of rotating parts, lowering lifecycle cost for plant operators.