KF-96L-0.65CS is a colorless, transparent, organic, lubricating dimethyl silicone fluid with a viscosity of only 0.65 mm²/s (25°C), making it an extremely low-viscosity silicone fluid. Its viscosity remains virtually unchanged over a wide range of temperatures, demonstrating excellent fluidity and stability. This product not only offers mold release, hydrophobicity, and defoaming properties that ordinary mineral and synthetic oils lack, but also meets the most stringent environmental requirements due to its chemical inertness and safety.

• Temperature Adaptability - KF-96L-0.65CS maintains stable performance over a temperature range of -50°C to 180°C, maintaining fluidity even at -65°C. Long-term cycling tests of its thermal stability and cold tolerance show that after 500 cycles of alternating high and low temperatures, its viscosity fluctuation remains within ±6%, significantly superior to conventional synthetic oils.

  
  

• Chemical Stability - The product is virtually unaffected by dilute acid and alkaline solutions at room temperature. After immersion in a 10% sodium hydroxide solution or a 20% sulfuric acid solution for 48 hours, its viscosity change is less than 5%, with no significant byproducts produced.

  
  

• Safety and Inertness - KF-96L-0.65CS is colorless, odorless, non-toxic, and physiologically inert, meeting multiple international safety standards. Its specific gravity is 0.760 at 25°C, and it exhibits excellent hydrophobicity and shear resistance.

  
  

• Surface Properties - This product has an extremely low surface tension, far lower than that of common mineral and synthetic oils. It spreads quickly on water surfaces and exhibits excellent defoaming and mold release properties. Experimental data shows that at a surface tension of 20 mN/m, its spreading rate is over 30% faster than that of mineral oil.

  
  

• Overall Performance - KF-96L-0.65CS exhibits excellent electrical insulation and radiation stability, with a volume resistivity exceeding 10¹⁴ Ω·cm. Its performance remains virtually unchanged even after long-term UV exposure. Lubricity testing indicates that when used in high-speed rotating equipment, the coefficient of friction can be maintained between 0.10 and 0.12, approximately 15% lower than traditional lubricants, significantly improving operating efficiency and component life.

Cosmetics Industry - In the cosmetics sector, KF-96L-0.65CS is primarily used in skincare and makeup formulations as a lubricant and texture enhancer. Its extremely low viscosity enables rapid spreading and forms a lightweight film, imparting smooth, pliable properties to products. Formulation experiments have shown that adding 1%-3% of KF-96L-0.65CS to lotions or foundations significantly improves the skin feel, reduces greasiness, and enhances breathability, meeting consumer demand for a lightweight, comfortable feel.

Electrical Applications - In the electrical industry, this product is valuable as an insulating oil and heat dissipation aid. Its high volume resistivity and low electrical loss effectively isolate current and prevent breakdown. Its thermal stability also enables stable operation in high-temperature electrical equipment. In practical applications, using KF-96L-0.65CS in transformers or high-voltage capacitor systems can extend equipment life by over 20%, while reducing maintenance frequency and improving overall electrical system reliability.