SagTex PHD is a high-performance silicone defoaming emulsion designed for complex working conditions such as textile processing. It maintains a long-lasting and stable defoaming effect in acidic or alkaline environments. A milky white liquid with moderate viscosity and excellent dispersibility, it quickly suppresses and eliminates foam, maintaining a clean and stable system. Compared to conventional defoamers, this product demonstrates superior performance even at low addition levels, significantly reducing user costs while preventing oil spots and agglomeration on fabrics and systems, improving overall production efficiency and user experience.

• Strong Acid and Alkali Resistance - SagTex PHD exhibits exceptional stability in both acidic and alkaline conditions. Tested data shows that its defoaming efficiency remains above 90% for over 48 hours of continuous operation within a pH range of 4 to 12. This ensures long-term stability even in complex environments.

  
  

• Low Dosage, High Efficiency - Compared to conventional defoamers, SagTex PHD achieves equivalent or even superior defoaming performance at lower dosages. Comparative tests show that its usage is 30% lower than that of traditional silicone defoamers, while still maintaining rapid defoaming and long-lasting foam suppression in foaming systems.

  
  

• Fast Defoaming - The product quickly breaks down foam at both room and high temperatures. Test data shows that at 80°C, a 0.05% addition completely eliminates foam within 30 seconds. This feature ensures stable production processes and prevents equipment disruptions caused by foam accumulation.

  
  

• Excellent Temperature Resistance - SagTex PHD maintains excellent defoaming performance even in high-temperature environments. In testing, after 60 minutes of continuous operation at 120°C, the defoaming effect retained over 85%, demonstrating its reliability in high-temperature processes such as dyeing and finishing, and chemical production.

  
  

• No-Agglomeration - The product does not form oily spots or aggregates after dilution. Testing shows that in hard water, the dispersion reaches over 95%, with no noticeable oily surface or sediment. This provides excellent user convenience and avoids secondary contamination or sedimentation.

  
  

• Excellent Dispersibility in Hard Water - SagTex PHD maintains uniform dispersion even in hard water. Experiments have shown that even at a water hardness of 300 ppm, the product maintains stable distribution and continuous defoaming, ensuring consistent system operation.

• Electronics Industry - During the cleaning and processing of electronic components, SagTex PHD effectively controls foam in cleaning and coolant solutions. Experiments have shown that using it in electronic cleaning fluid circulation systems reduced foam levels by 70%, significantly improving cleaning efficiency and component surface cleanliness, while also preventing residual bubbles that could cause weld or coating defects.

  
  

• Automotive and Aerospace - Defoamers prevent bubbles in coatings during automotive painting and aviation material cleaning processes. Application examples show that using SagTex PHD improves coating surface smoothness by 15% and reduces porosity to below 1%, thereby enhancing the coating's corrosion resistance and appearance.

  
  

• Pharmaceutical and Healthcare - In fermentation and pharmaceutical processes, SagTex PHD suppresses foam that affects reaction volume and mass transfer efficiency. Comparative experiments have shown that it can reduce foam in antibiotic fermentation broth by over 80%, increasing effective yields and reducing the risk of contamination caused by foam overflow.

  
  

• Industrial Production - In papermaking, printing and dyeing, and chemical production, this product ensures continuous system operation. Test data shows that after use in the papermaking white water circulation, the air content of the pulp is reduced by 20%, significantly improving production line operational stability and reducing the number of downtimes for cleaning.

  
  

• Consumer Products and Home Appliances - When used in daily chemical products such as cleaners and detergents, SagTex PHD maintains clarity and stability. Formula experiments show that after use in hard water conditions, the surface foam control rate of the detergent reaches over 85%, providing consumers with a better cleaning experience.